= TAKOTO = THE ONLY HOT-END YOU WILL NEED
Affordable FDM / FFF 3D Printer All Metal Hot-End for Professionals & Enthusiasts
HE20 Specifications
Some of the advantages of Takoto HE20 include:
- All metal (tested to >320°C)
- Dual vertical heater cartridges (standard Ø6.0 x 20mm, any wattage that your machine can support), clamped in for good thermal transfer
- Standard Ø3.0 x 15mm temp-sensor (thermistor or PT100/1000) clamped between the heaters & the nozzle for accurate sensing
- Standard E3D Volcano nozzle, because they are readily available in various metals & work well
- Very rigid structure via 3 titanium hollow pillar mounts, because crashes happen and threaded heat-breaks can bend, tear out, or break
- The heat is retained to the melt zone by the titanium feed tube & copper heat sink, significantly limiting heat-soak to the filament in the feed mechanism
- Very well cooled via modular fan options, and design protected for future liquid cooling
- Thermally protected with a high-temperature silicon sock to minimise heat loss (increase efficiency) & for safety
- Independently proven to flow >30mm3/s consistently, continuously, repeatably (PLA+ @ 215C, 0.8 nozzle, 0.4 layer)
- Designed for mounting to Bondtech BMG-M; Bondtech LGX; Titan Aero; Hemera; Raise 3D N1; ... with designs for alternative mounting options in future
(Image shows Hotend populated with optional components)
HE50 Specifications
All the features of the HE20, plus:
- Extra processing capacity - independently proven to consistently & continuously deliver >55mm3/sec (PLA+ @ 215C, 1.0 nozzle, 0.5 layer) .This dual-cartridge Hotend chews through filament at an astonishing rate.
- It is strong! The Body is held rigid by the same 3 titanium pillars that have proven near indestructible on the HE20, and it is interchangeable with the HE20. There is no chance of shearing off a weak heat-break with this Monster.
(Image shows Hotend populated with optional components)